ART3160 X-fluorescence oil sulfur analyzer

The ART3160 X-ray fluorescence oil sulfur analyzer mainly detects the sulfur content in oil products. It adopts the principle of energy dispersion and is environmentally friendly. Its repeatability and reproducibility meet the relevant requirements of national standards GB/T17040 and GB/T11140, and also fully comply with the stricter requirements of standard D4294-02. The price is only a fraction of that of imported instruments

The main uses of the X-ray fluorescence oil sulfur analyzer are:

1. Measure the total sulfur mass percentage content of crude oil, petroleum, heavy oil, diesel oil, kerosene, gasoline and Naphtha;

2. Measure the total sulfur content in coal chemical products, such as primary benzene;

3. Measurement of total sulfur content in other liquid samples;

4. Determination of total sulfur content in fine powder samples;

Characteristics of fluorescence oil sulfur analyzer instrument:

1. Mechatronic integrated microcomputer design of instruments, simple and beautiful;

2. Wide variety of detection, wide detection range, fast analysis speed, and low consumption of standard samples;

3. Using the relative comparative analysis method of fluorescence intensity ratio, the temperature and atmospheric pressure are automatically corrected, and the carbon to hydrogen ratio (C/H) can also be corrected;

4. Large screen LCD display, human-machine dialogue for operation; Operation error, able to emit sound automatic alarm;

5. The automatic diagnosis function of the instrument determines the working status and electrical parameters of the instrument through counting and energy spectrum measurement of reference samples;

6. The instrument has a standard serial communication RS-232C interface and can be connected to any computer or computer networking system;

7. Use a disposable single sided Mylar membrane sample cup to avoid cross contamination; The sample cup is made using multifunctional pressure pieces, which are fast and convenient. The cup cover has air holes and can record the sample number, S% (m/m), and date;

8. The single sample stage is placed on the slide rail, which can automatically enter and exit according to instructions, and the positioning is very accurate; Automatically extend while waiting for sample analysis

It is very convenient to place samples and replace anti oil leakage components outside the body;

9. The instrument has a large amount of data storage, and the content analysis results and calibration working curve parameters can be checked at any time;

10. Adopting a thermal printer, it is very convenient to replace the printing paper and saves printing ribbon consumables;

11. Tight protection against oil leakage. The sample cup is placed on the oil leakage prevention component and only enters the detection system together during sample analysis. During non measurement of the sample, the oil leakage prevention component automatically moves outside the instrument to closely protect the detection system from pollution caused by oil leakage;

12. Safe X-ray protection measures: There are strict protective measures around the detection system of the instrument to prevent X-rays

Leakage, no harm from X-ray ionizing radiation to individuals and groups.

Technical specifications of fluorescence oil sulfur analyzer:

1. Sulfur measurement range: 7ppm~5%;

2. Repeatability (r): ＜ 0.029 (S+0.6);

3. Reproducibility (R): ＜ 0.063 (S+0.6);

4. Detection limit: 7ppm;

5. Oil content: 2-3ml (equivalent to oil layer thickness of 3mm~4mm);

6. Measurement time: 60, 120, 240, 300, 600 seconds, any setting;

7. Single sample automatic measurement, measurement frequency: 2, 3, 5, 10, 50 times can be set arbitrarily, and the average value and standard deviation will be given after measurement;

8. Number of calibration curves: The instrument can access 9 calibration curves, 5 are univariate linear curves, and 4 are binomial parabolas;

9. Working conditions: temperature 5-40 ℃; Relative humidity: ≤ 85% (30 ℃);

10. Power supply: AC220V ± 20V, 50Hz, rated power: 30W;

11. Size and weight: 468mm × 368mm × 136mm; 13kg;